How to Specify a Modern Flames Orion Multi Electric Fireplace
A three-sided firebox serves a room divider or an architectural peninsula, where people view the flame from more than one direction. That geometry is the entire reason the series exists, and it is also what drives the framing requirement. Modern Flames Orion multi-electric fireplaces chassis run significantly deeper than flat-wall fireboxes. Within the fireplaces catalog, this is the format that asks the framing crew for the most room.
What Framing Depth Does a Three-Sided Chassis Require?
Side glass and the internal projection assembly both consume depth a single-sided unit never needs. Rough opening depth typically falls in a defined band:
- Nine to twelve inches covers the usual rough opening depth range across the series
- The specific width dimension sheet governs the actual figure, since depth varies by chassis size
- Side glass flanges have to clear the framing on both end panels, not just the front
Extended stud cavities get built out to accommodate that depth. Surrounding drywall or stone facing then finishes completely flush with the metal glass frame on all three exposed faces. Installation otherwise follows the same principles as other built in electric fireplaces, with three finish edges to manage instead of one.
Can the Orion Multi Be Reconfigured as Two-Sided or Single-Sided?
This is the most useful feature in the series and the least well known. Removable side glass cover plates let installers change the viewing configuration on the jobsite.
One chassis therefore serves three layouts. It can run as a three-sided bay, as a two-sided left or right corner, or as a single-sided flush wall firebox. That modularity matters when a wall layout shifts during construction, which happens more often than plans suggest. A contractor holding an Orion Multi is not locked into the configuration that was drawn.
Which Width Suits the Peninsula: 52, 100, or 120 Inches?
Three widths cover the range, and each serves a different scale of opening:
- 52 inches suits a compact room divider or a defined peninsula in a mid-sized space
- 100 inches anchors a substantial open-plan division between two living areas
- 120 inches spans a full architectural peninsula in large residential or commercial work
Sightlines matter more here than on a flat wall. A three-sided unit gets viewed from multiple positions, so the width should read correctly from each of them rather than from one primary seating group.
How Does Heliovision Perform Across Three Glass Faces?
Heliovision uses digital video projection to display high-definition real fire footage on an internal backer panel. The projection approach is what allows a consistent image across a wrapped glass enclosure.
Users switch between multiple distinct flame styles, including wood-burning, gas, and hybrid presentations. Active ambient crackle audio and multi-color LED media bed lighting run alongside whichever style is selected. Fixed displays elsewhere in the electric fireplaces category offer no such choice. The flexibility is worth more on a multi-sided unit, since the flame stays visible from more of the room.
What Electrical Service Does Each Width Need?
Power requirements split at the top of the range:
- 52-inch units operate on standard 120V plug-in or hardwire connections, drawing up to 1,500 watts
- 100 and 120-inch units carry dual-voltage capability, and hardwiring to a dedicated 240V 20-amp circuit raises fan-forced output to roughly 8,800 BTUs per hour
Peninsula framing complicates late electrical work more than a flat wall does. Both faces get finished, so the dedicated circuit belongs in the rough-in without exception.
When Does a Single-Sided Modern Flames Series Fit Better?
Deep peninsula framing is not always available. Standard 2x6 stud walls cannot accept a multi-sided chassis without being built out.
Contractors facing that limit can specify shallower single-sided Modern Flames Orion Slim electric fireplaces models, which fit conventional framing. Traditional hearth openings suit the rectangular proportions of Modern Flames Orion Traditional electric fireplaces. Budget-conscious masonry retrofits point toward Modern Flames Redstone electric fireplaces instead.
How Do Mantels and Surrounds Finish a Peninsula?
Custom carpentry around a three-sided unit is demanding work, since the surround has to resolve cleanly on multiple faces.
Factory-matched floating surrounds from the fireplace mantels inventory solve that without site-built millwork. The Allwood wall system addresses surround design and firebox integration together, which suits projects wanting a coordinated result. Custom trims from the fireplace accessories catalog handle the remaining detail work.
Where Does the Orion Multi Sit Across a Project?
A peninsula installation rarely represents an entire build. All collections holds complete technical data sheets across every installation category, which helps when several rooms carry different formats.
Talk to a Fireplaces Direct Peninsula Framing Specialist
Cavity depth and viewing configuration both need settling before the divider wall gets framed. Fireplaces Direct specialists review the rough opening against the width dimension sheet and confirm which configuration the layout supports. That review also covers circuit sizing for the larger chassis.