Modern Flames Redstone Electric Fireplaces

Modern Flames Redstone electric fireplaces pair Hybrid-FX flame technology with traditional rectangular viewports in 26, 30, and 36-inch widths. Each size installs as a zero-clearance built in electric fireplaces chassis or a slide-in retrofit insert, joining the broader electric fireplaces and fireplaces ranges at Fireplaces Direct.

What Sets the Modern Flames Redstone Series Apart

Redstone occupies the value tier of the Modern Flames lineup. That position raises a fair question: what the lower price actually costs in performance. The honest answer involves the flame optic system and very little else. Installation flexibility, chassis construction, and control separation all carry over. Compared against other rectangular formats in the fireplaces catalog, the series competes on installed cost rather than on flame realism.

How Does Hybrid-FX Build the Flame Display?

Hybrid-FX uses high-intensity LED projection rather than recorded video. Many units across the electric fireplaces category rely on a single flame layer. This system stacks three:

  • Independent flame colors, offering ten distinct combinations that shift the overall tone of the display
  • An active ember bed, carrying ten separate options that glow beneath realistic log media
  • Downlighting, which casts light onto the media from above and adds depth the flame layer alone cannot produce

Operators mix those layers to suit the room. A traditional setting calls for warm amber over a dim ember bed. A contemporary space can run cooler tones with the downlighting raised.

How Does Redstone Compare to the Premium Orion Line?

Both series occupy the same rectangular footprint. The optic system separates them.

Premium Modern Flames Orion Traditional Electric Fireplaces models project high-definition video of real fire. Redstone generates its flame from LED layers instead. Viewing distance decides how much that difference registers. A firebox across an open living room reads similarly from either system. A unit mounted a few feet from a seating group shows the distinction more clearly. Secondary bedrooms, offices, and guest spaces rarely justify the premium optic. Primary living rooms often do.

What Framing Does the Built-In Chassis Need?

A built-in Modern Flames Redstone unit frames directly into standard 2x6 stud cavities. No furring, no bump-out, no expanded wall depth. Drywall, tile, stone veneer, or custom facing finishes flush against the outer enclosure edge. That framing profile matches the rest of the built in electric fireplaces category.

Three widths cover the series:

  • 26 inches suits bedrooms and home offices where wall space is limited
  • 30 inches fits most standard living room walls without crowding adjacent furniture
  • 36 inches reads as the focal point of a larger room

New framing leaves that choice open to proportion alone.

How Do Installers Size a Retrofit Insert?

Existing masonry openings follow different rules. The cavity narrows toward the back wall because masonry fireboxes are built with angled sides. A steel chassis holds a constant width.

Installers therefore size electric fireplace inserts to the rear wall measurement, not the front opening. Interior height at the rear matters for the same reason. A chassis sized off the front face will bind against side brick before it seats. On older masonry, the taper can remove several inches of usable width, which often rules out the largest chassis in the series.

Which Trim Covers a Legacy Masonry Opening?

Original openings almost never match a modern chassis outline. Wide surround trim kits bridge that difference.

Trims in the fireplace accessories collection cover the transition between the metal flange and the surrounding wall finish. Measuring the chassis after installation, rather than working from catalog dimensions, keeps the order to one shipment.

What Electrical Circuit Does Every Redstone Width Use?

Every width in this series runs on standard 120V service. The specification holds across the lineup:

  • Supply, a standard 120V 15-amp household outlet or a hardwired junction box connection
  • Draw, reaching up to 1,500 watts at full output
  • Heat, delivering roughly 5,000 BTUs per hour of supplemental convective warmth

No width offers a 240V option, which removes a planning step other electric fireplaces require. No electrician pulls a dedicated circuit, and no panel upgrade enters the budget. On a masonry conversion, the outlet already serving the room usually serves the new insert as well.

Do the Flame and Heater Run Independently?

The flame display and the fan-forced heating element operate on separate controls. Either runs without the other.

That separation matters more than it sounds. A Redstone unit can produce ambient flame light through summer while drawing minimal power, then add heat once the season turns. Rooms that already carry adequate central heat still get year-round use from the firebox.

Where Does the Redstone Fit Across a Larger Project?

A single value-tier decision rarely settles a whole renovation. All collections consolidate every gas, wood, and electric category on one page, which helps when a project covers several rooms at different budget levels.

Talk to a Fireplaces Direct Electric Hearth Specialist

Rear-wall measurements determine which Redstone width clears an existing cavity. Fireplaces Direct specialists review those dimensions and confirm the chassis before an order ships. The same review identifies which surround trim width covers the remaining gap around a legacy opening.

Frequently Asked Questions

  • What is the primary functional difference between Redstone built-in and insert configurations?

    The built-in configuration uses a clean metal chassis engineered for new stud wall construction, where drywall or tile comes flush to the firebox edge. The insert configuration includes a slide-in metal housing, front glass assembly, plug kit, and decorative surround trim. That trim covers gaps left when retrofitting an existing masonry or factory-built firebox.

  • How do contractors measure an existing fireplace before ordering a Redstone insert?

    Installers measure front opening width, rear wall width, floor depth from front to back, and front opening height. Masonry fireboxes taper inward toward the back. The rear width and interior height therefore determine the maximum insert chassis that will slide into the cavity without striking side brickwork.

  • How does Hybrid-FX flame projection operate in the Redstone series?

    Modern Flames Hybrid-FX technology uses high-intensity LED projection. It blends independent flame colors, active ember bed illumination, and downlighting. The system provides ten distinct flame color combinations, ten ember bed options, and realistic log media presentation with independent flame and heater controls.

  • What electrical circuit requirements apply to operating a Redstone electric firebox?

    Modern Flames Redstone electric fireplaces operate on standard 120V plug-in or hardwired connections and draw up to 1,500 watts. They plug into a standard 120V 15-amp household outlet. Output reaches approximately 5,000 BTUs per hour of supplemental convective room heat.

  • Does the Redstone series suit a first electric fireplace installation?

    It often does. Every width runs on a standard 120V household circuit, which removes the dedicated 240V line and panel upgrade questions that larger dual-voltage chassis raise. That makes the series a common choice for a first masonry conversion where budget and installation simplicity outweigh maximum flame customization.