What makes Real Fyre logs different from other gas logs?

The castings and the finish. Real Fyre logs are molded from real wood and formed in refractory ceramic, then hand-painted rather than finished with a uniform spray coat. The result holds detail and color variation that reads convincingly up close, which is where cheaper molded log sets tend to fall apart visually. The line is also unusually broad, so there is generally a species and size that suits a given firebox.

Which Real Fyre burner system should I choose?

It depends on how you want to run the fireplace. A match-lit burner is the simplest and least expensive, lit manually with a key valve. A safety pilot burner adds a standing pilot and a valve with a thermocouple, so the gas shuts off if the pilot goes out. Electronic ignition adds remote and thermostat control and has no standing pilot, which is more efficient but requires power. If you want wall switch or remote operation, you need one of the pilot-equipped systems.

Can Real Fyre logs be used in an outdoor fireplace?

Some sets can, but you need a configuration built for it. Outdoor use calls for a stainless steel burner rather than standard steel, since exposure to moisture will corrode a burner not specified for it, and the set needs to be appropriate for the specific outdoor firebox. Look for the stainless steel burner versions and confirm the set is approved for outdoor installation before ordering.

Real Fyre Gas Logs

Shop Real Fyre gas log sets, one of the most recognized names in the category. Real Fyre logs are hand-painted over refractory ceramic and offered in a wide range of wood species, sizes, and burner systems, in both vented and vent-free configurations.

Real Fyre Gas Logs

Real Fyre has built its reputation on log realism. Each set is cast from real wood, formed in refractory ceramic, and hand-painted, which is why a Real Fyre stack holds up to close inspection in a way that molded generic logs do not. The line spans a broad set of wood species and styles, from classic split oak to charred and driftwood looks, in sizes to fit most residential fireboxes.

The range covers both vented sets, which burn with the damper open and produce the tallest and most realistic flame, and vent-free sets for installations where heat output matters more than flame drama. Burner options run from simple match-lit systems to safety pilot kits to electronic ignition with remote and thermostat control, and several sets are also offered in double-sided configurations for see-through fireplaces and with stainless steel burners for outdoor use.

Why Buy Real Fyre Gas Logs

Hand-painted refractory logs cast from real wood, with detail that holds up at close range.
One of the widest selections of species, sizes, and styles in the category.
Available in vented sets for maximum flame realism and vent-free sets for efficient heat.
Burner options from match-lit through electronic ignition with remote and thermostat control.
Double-sided and stainless steel burner configurations available for see-through and outdoor applications.

What to Consider When Buying

Decide between vented and vent-free first, since it determines both the flame appearance and where the set can be installed.
Measure your firebox width at the front and rear, plus depth and height, and size the set to the rear width.
Choose your burner system based on how you want to operate the fireplace. Match-lit is simplest; a safety pilot adds a standing pilot and valve; electronic ignition adds remote and thermostat control.
Confirm ANSI certification on the specific set if that matters for your installation, since it varies within the line.
For outdoor or see-through fireplaces, look specifically for the stainless steel burner and double-sided versions.

Frequently Asked Questions

What makes Real Fyre logs different from other gas logs?
The castings and the finish. Real Fyre logs are molded from real wood and formed in refractory ceramic, then hand-painted rather than finished with a uniform spray coat. The result holds detail and color variation that reads convincingly up close, which is where cheaper molded log sets tend to fall apart visually. The line is also unusually broad, so there is generally a species and size that suits a given firebox.
Which Real Fyre burner system should I choose?
It depends on how you want to run the fireplace. A match-lit burner is the simplest and least expensive, lit manually with a key valve. A safety pilot burner adds a standing pilot and a valve with a thermocouple, so the gas shuts off if the pilot goes out. Electronic ignition adds remote and thermostat control and has no standing pilot, which is more efficient but requires power. If you want wall switch or remote operation, you need one of the pilot-equipped systems.
Can Real Fyre logs be used in an outdoor fireplace?
Some sets can, but you need a configuration built for it. Outdoor use calls for a stainless steel burner rather than standard steel, since exposure to moisture will corrode a burner not specified for it, and the set needs to be appropriate for the specific outdoor firebox. Look for the stainless steel burner versions and confirm the set is approved for outdoor installation before ordering.